Skip to main content
Version: doctorVet V2/Plus

Getting Started

Contents of the Case​

Parts Included With doctorVet Diode Laser
Laminated Quick Start Guide
Lift up the top lay of protective foam to reveal the fiber and handpiece.
Laser Warning Sign
Laminated Start Guide
Lift Up Foam
Laser Warning Sign

First Time Set-Up - 1​

Insert fiber holder
Remove laser aperture protection cap
Remove optical fiber protection cap
1. Insert the fiber holder into the dedicated hole on the left or on the right.
2. Remove the protection cap from the laser aperture.
3. Remove the protection cap on the optical fiber.
Insert fiber holder
Remove laser aperture protection cap
4. Connect the fiber A to the laser aperture, and its electrical connection in connector B. Then insert the interlock in C and the power supply in D.

First Time Set-Up - 2​

Insert fiber holder
Remove laser aperture protection cap
Remove optical fiber protection cap
1. Insert the fiber holder into the dedicated hole on the left or on the right.
2. Remove the protection cap from the laser aperture.
3. Remove the protection cap on the optical fiber.

First Time Power-Up​

On/Off switch
Doctor Vet laser is cordless thanks to its internal battery. The laser can also be used with the power supply. Charge the laser when the battery icon shows a single line remember to switch on the power supply.
Starting Message
Login
Main screen
A starting message will appear. Press the LAMBDA icon to proceed.
Complete the Laser Safety Test to learn the default password, and enter it here
Main Screen